Knowledge

The use of instant electric water heaters in winter may also cause the water temperature to fail to reach the situation. For example, a few days ago, a user reported that after buying an instant electric water heater and using it, it was found that the water temperature could not be reached, especially the temperature these days. It is extremely low, so similar situations do happen often, so is it because the temperature of the machine is not up to, or is it a problem with the operation or a malfunction?

According to the use temperature of our bath, 35-48 degrees Celsius is the normal range, the temperature should not be too high, otherwise it is easy to burn people or the temperature is too high to damage the skin. Whether in winter or other seasons, instant electric water heaters are very suitable. In view of this group of conditions, there may be several reasons.

1. Check whether the power is limited. Many brands of instant electric water heaters now have the maximum power limit. So it is possible that the power is limited to the lowest range, for example, there are set powers: 5, 6, 7, 8KW, then if the maximum use power is set to 6KW in winter, then the temperature set in winter is 47 degrees. The power of 6KW is definitely not enough, so the temperature is not up to it, and it can only be met by adjusting to 7KW.

2. The type of purchase is incorrect. Instant electric water heater has a difference between gear and constant temperature. The gear type may be Xiaochubao Instant Heater, a special water heater for kitchen. If it is used in the bathroom in winter, the temperature will definitely not reach, and the constant temperature depends on the maximum power usage is it suitable.

3. The machine is malfunctioning. If the temperature is not reached, if the above two conditions are not, it can only be a machine failure problem, which is related to the internal heating element. Many heating elements are composed of several internal components. If one of them burns out or is damaged, the power of the heating element is greatly reduced. Therefore, the heating temperature must not be reached, and the heating element needs to be replaced.

4. The water output is too large. The water output of instant electric water heaters reaches the water consumption of bathing, but some household users use large shower heads and the water output is very large. For the instant electric water heater, the water output is proportional to the power, and the water output is far in proportion. The maximum power used by Yuanda is definitely not enough to set a high temperature. We only need to follow the normal use.